AU01 ~ AU01a fast recovery rectifier diodes prv : 200 ~ 600 volts io : 0.5 ampere features : * high current capability * high surge current capability * high reliability * low reverse current * low forward voltage drop * fast switching for high efficiency mechanical data : * case : do-41 molded plastic * epoxy : ul94v-o rate flame retardant * lead : axial lead solderable per mil-std-202, method 208 guaranteed * polarity : color band denotes cathode end * mounting position : any * weight : 0.34 gram maximum ratings and electrical characteristics rating at 25 c ambient temperature unless otherwise specified. single phase, half wave, 60 hz, resistive or inductive load. for capacitive load, derate current by 20%. symbol AU01z AU01 AU01a unit maximum peak reverse voltage v rm 200 400 600 v maximum peak reverse surge voltage v rsm 250 450 650 v maximum average forward current i f(av) 0.5 a maximum peak forward surge current ( 50 hz, half-cycle, sine wave, single shot ) maximum forward voltage at i f = 0.5 a v f 1.7 v maximum reverse current at reverse voltage ta = 25 c i r 10 m a maximum reverse current at reverse voltage ta = 100 c i r(h) 150 m a maximum reverse recovery time ( note 1 ) trr 0.4 m s junction temperature range t j - 40 to + 150 c storage temperature range t stg - 40 to + 150 c note : (1) reverse recovery test conditions : i f = 10 ma, i rp = 10 ma. page 1 of 2 rev. 02 : march 25, 2005 rating i fsm 15 a do - 41 dimensions in inches and ( millimeters ) 1.00 (25.4) min. 0.107 (2.7) 0.080 (2.0) 0.205 (5.2) 0.166 (4.2) 1.00 (25.4) min. 0.034 (0.86) 0.028 (0.71) * pb / rohs free
rating and characteristic curves ( AU01 ~ AU01a ) fig.1 - reverse recovery time characteristic and test circuit diagram fig.2 - derating curve for output fig.3 - maximum non-repetitive peak rectified current forward surge current 0 25 50 75 100 125 150 175 1 2 4 6 10 20 40 60 100 ambient temperature, ( c) number of cycles at 50hz fig.4 - typical forward characteristics fig.5 - typical reverse characteristics 0 0.2 0.4 0.6 0.8 1.0 1.2 1.4 1.6 1.8 page 2 of 2 rev. 02 : march 25, 2005 ta = 25 c 0.8 0.6 0.4 0.2 1.0 10 10 1.0 12 0 15 0 9 6 3 1.0 80 0.01 0.1 0.1 100 140 0 20 40 60 120 percent of rated reverse voltage, (%) peak forward surge current, amperes average forward output current, amperes forward current, amperes reverse current, microamperes t j = 25 c t j = 100 c 20 m s 200 m s forward voltage, volts trr 0.1 i rp 10ma i f 10 ma i rp 100 w 0.001 0.01 specimen note : i f = i rp = 10 ma to 1 ma 100 m f
|
